All Gas types Available
• Explosion proof
• Rugged and reliable
• CANbus / 4~20mA outputs
• Optional 2 alarm relays plus fault relay or 3 alarm relays
• Wide range of gas types / sensors
• Addressable or stand alone
• Hyper terminal communications / RS232 – live data and set up with 232 adapter
• One man calibration
• Data logging

The XDI-F1 Gas Sensor is capable of utilising a wide range of sensor cell types offering an unmatched number of gases that may be monitored. Standard 4~20mA signaling with CANbus address enables the sensors to be networked via the GDS Combi control system or customer preferred monitoring systems.

Explosion proof ATEX IECEx
112G Exd IIC T6-T3 Gb
112D Extb IIIC T85˚C Db
Power Supply – 15 to 30vDC 24v nominal
Logging – Intervals – one minute to one hour
Storage – 2,880 readings
Outputs – 3 wire 4~20mA / 4 wire CANbus
Optional relays – Low alarm S.P.C.O / High alarm S.P.C.O / Fault alarm S.P.C.O
Inhibit option during servicing
Rating –  0.5A @30vDC
Housing Material – Copper free aluminium alloy, optional stainless steel
Finish – Chemical resistant epoxy paint / Optional – Marine grade finish
Sensor Material – Stainless steel 316S16
Ingress Protection – IP63 + weather shield IP65
Cable Entry – 2 x M20 – 1.5 pitch – alternatives 25mm – 3/4 NPT
Weight – 1.6kg
Temperature -15˚C to +55˚C
See certification for Exd use
Humidity – 0 to 99% RH non-condensing